Adsorption of Molybdenum on Titania from Aqueous Solutions

The adsorption of Mo from dilute aqueous solutions (10(-3) to 3x10(-2) M) is effected on three samples of titania, two are anatase and the third is P25, which is composed of rutile and anatase. The adsorption isotherms at 298, 318, and 338 K are analyzed using a Langmuir linear equation. The isotherms on P25 showed a distinct inflection point that is reproduced by two linear portions, indicating different adsorption regimes. This adsorption behavior is explained as follows: with low amount adsorbed the adsorption is initiated by protonation of the basic hydroxyls on which the negatively charged MoO(4)(2-')s are adsorbed, and this is accompanied by an increase in the pH of the impregnating solution. At higher adsorption the coordinatively unsaturated Ti(4+) sites participate in the process, leading to a decline in the initial increase in pH. In the case of the two anatase samples the low surface area resulted in poor distribution of adsorption sites; consequently, the distinction between the two modes of adsorption was not entirely clear. The higher adsorption site density in the case of anatase is accompanied by a lower surface coverage, θ, than that for P25. The heat of adsorption, Q, on the three titania samples showed a linear increase with θ, which is represented by the regression equation: -Q=95.77θ-4.25 (R(2)=0.993). Copyright 2001 Academic Press.     

Synthesis of imidazoles as novel emivirine and S‐DABO analogues

5‐Alkyl‐4‐benzyl‐1,3‐dihydroimidazol‐2‐ones ( 3a‐d ) and 5‐alkyl‐4‐benzyl‐1,3‐dihydroimidazole‐2‐thiones (7a‐d) were prepared via Dakin West reaction on DL‐phenylalanine with the appropriate aliphatic acid anhydrides followed by hydrolysis and reaction with potassium cyanate or potassium thiocyanate. Compounds 3a‐d were alkylated with ethoxymethyl chloride to give the alkylated imidazoles 5a‐d which were considered analogues of Emivirine with deletion of carbonyl group at the 4‐position. Alkylation of 7a‐d afforded the corresponding S‐alkylated derivatives 8a‐p which in a similar way were considered analogues of S‐DABO. However all the imidazole derivatives were devoid of activity against HIV.     

On-column trace enrichment by sequential frontal and elution electrochromatography II. Enhancement of sensitivity by segmented capillaries with z-cell configuration--application to the detection of dilute samples of moderately polar and nonpolar pesticides

An on-column trace enrichment method for capillary electrochromatography of dilute samples is described. It involves the sequential use of frontal and elution electrochromatography on a segmented capillary column comprising of two contiguous segments each packed with a different sorbent. While the entering segment is for preconcentration by frontal electrochromatography the second segment is much longer and is meant for separation of the enriched analytes in the subsequent elution electrochromatography step. The preconcentration segment is usually packed with a sorbent that affords the highest affinity towards the solutes of interest while the separation segment is packed with a stationary phase that exhibits the highest selectivity and separation efficiency for the analytes. The detection is performed in the UV using a z-cell configuration for achieving an increased path length for detection. The effectiveness of this on-column trace enrichment is demonstrated on dilute samples of moderately polar solutes (e.g., carbamate insecticides) and nonpolar solutes (e.g., pyrethroid insecticides). Under optimal frontal and elution electrochromatography conditions. 817- and 1100-fold sensitivity increase are achieved for permethrin (a pyrethroid insecticide) and methiocarb (a carbamate insecticide), respectively, with a UV detector. The method is demonstrated with real water samples (e.g., tap and lake water samples) spiked with carbamate and pyrethroid insecticides. The limits of detection for the pesticides achieved in tap and lake waters reached 10(-8) to 10(-9) M.     

Adsorption of Some Essential Amino Acids on Hydroxyapatite

Samples of synthetic hydroxyapatite, Ca(10)(PO(4))(6)(OH)(2), obtained by wet method and calcined at 1173 K in air were used in an adsorption study of some essential amino acids, mainly histidine, methionine, and tryptophan. Adsorption isotherms were obtained using aqueous solutions of concentration range 2.7x10(-2)-1.3x10(-3) M at 303, 318, and 343 K, under near neutral conditions. The mode of adsorption was studied using IR spectroscopy. The results are discussed in terms of the dependence of the adsorption process both on the functional groups on the hydroxyapatite and on the solution chemistry of the aqueous amino acids solutions. Copyright 2001 Academic Press.     

Potentiodynamic and cyclic voltammetric behaviour of a lead electrode in NaOH solution

Summary The electrochemical behaviour of lead in NaOH solution was studied by potentiodynamic and cyclic voltammetric techniques in combination with X-ray diffraction analysis. The active dissolution of lead involves a small shoulderA1 followed by a peakA1 prior to a passive region. The shoulderA1 is assigned to the electroformation of a Pb(OH)₂ film, whereas peakA1 is due to the formation of PbO. Beyond the passive region, the current density increases again, forming a small shoulderA2 and a peakA2 prior to the oxygen evolution potential. The shoulderA2 and the peakA2 are correlated to the electrooxidation of PbO to Pb₃O₄ and PbO₂, respectively. The intensity of the anodic peaks increases with increasing alkali concentration, temperature and scan rate. In cyclic voltammetry, the reverse scan shows two cathodic peaksC1 andC2 which are correlated to the electroreduction of PbO and PbO₂ respectively, to Pb.

---

Potentiodynamisches und cyclovoltammetrisches Verhalten einer Bleielektrode in NaOH-Lösung

Zusammenfassung Das elektrochemische Verhalten von Blei in NaOH wurde mittels potentiodynamischer und cyclovoltammetrischer Techniken unter Zuhilfenahme der Röntgenbeugungsanalyse untersucht. Die aktive Auflösung von Blei verläuft über eine SchulterA1, die von einem einer passiven Region vorgelagerten PeakA1 gefolgt wird. Die SchulterA1 wird der elektrochemischen Bildung eines Pb(OH)₂-Films, der PeakA1 der Bildung von PbO zugeschrieben. Jenseits der passiven Region steigt die Stromdichte wieder an, und vor Erreichen des Sauerstoffpotentials treten eine kleine SchulterA2 und ein PeakA2 auf, die mit der Elektrooxidation von PbO zu Pb₃O₄ und PbO₂ korrelieren. Analog dazu beobachtet man in der cyclischen Voltammetrie zwei kathodische PeaksC1 undC2, die der Elektroreduktion von PbO und PbO₂ zu Pb entsprechen. Die Intensität der anodischen Peaks steigt mit steigender Alkalikonzentration, Temperatur und Scangeschwindigkeit.

     

A facile synthesis of novel triazoloquinoxahnones and triazinoquinoxalinones

A series of 1-aryl-s-triazolo[4,3-a]quinoxalin-4-ones, 3 , were synthesized via the pyrolysis of the corresponding hydrazones, 6 . Thus, the cyclodehydrogenation occurred by refluxing them in an inert solvent (e.g. ethylene glycol) to give the triazoloquinoxalin-4-ones in a satisfactory yield. Using DMSO as a solvent for the above transformation afforded as a minor by-product an S-ylid. In contrast to earlier findings, annelation of a six-membered ring was successful and achieved through the pyrolysis of the pyruvate hydrazones derived of the quinoxalin-4-ones at ?230° to give the as-triazino[4,3-a]quinoxalin-5-ones, 4 . The reaction of 5 with acetylacetone afforded 3-(3′,5′-dimethylpyrazol-1-yl)-2(1H)-quinoxalinone, 10 . The structural assignments for the new compounds were based on their elemental analysis and spectroscopic data as well as an independent synthesis.     

Hygrometric Determination of Water Activities and Osmotic and Activity Coefficients of NH4Cl–LiCl–H2O at 25°C

The mixed aqueous electrolyte system of ammonium and lithium chlorides has been studied by the hygrometric method at 25°C. The relative humidities of this system are measured at total molalities from 0.3 to 6 mol-kg^{– 1} for different ionic-strength fractions y of NH₄Cl with y = 0.33, 0.50, and 0.67. The data obtained allow the deduction of new water activities and osmotic coefficients. The experimental results are compared with the predictions of the ECA (extended composed additivity) law proposed in our previous work. The Zdanovskii–Stokes–Robinson (ZSR), the Robinson–Stokes (RS), Reilly–Wood–Robinson (RWR), the Pitzer, and the Lietzke–Stoughton (LS II) models are also compared with our results. Predictions made using these models are, in general, consistent with our results. From these measurements, new Pitzer mixing ionic parameters are determined and used to predict the solute activity coefficients in the mixture for different ionic-strength fractions.     

Adsorption of atomic hydrogen at a nanostructured electrode of polyacrylate-capped Pt nanoparticles in polyelectrolyte

Atomic hydrogen electrosorption is reported at crystallite sites of polyacrylate-capped Pt nanoparticles (d = 2.5 +/- 0.6 nm), by assembling nanostructured electrodes of polyacrylate-Pt nanocrystallites layer-by-layer in a cationic polyelectrolyte, poly(diallyldimethylammonium chloride). Cyclic voltammetry in 1 M H2SO4 revealed a strongly adsorbed hydrogen state and a weakly adsorbed hydrogen state assigned to adsorption at (100) and (110) sites of the modified nanocrystallites, respectively. Resolving hydrogen adsorption states signifies that surface capping by the carboxylate groups is not irreversibly blocking hydrogen adsorption sites at the modified Pt nanoparticle surface. Adsorption peak currents increased with increasing the number of layers up to 16 bilayers, indicating the feasibility of nanoparticle charging via interparticle charge hopping and the accessibility of adsorption states within the thickness of the nanoparticle/polyelectrolyte multilayers. Despite similarity in hydrogen adsorption in the cyclic voltammorgrams in 1 M H2SO4, negative shifts in adsorption potentials were measured at the nanocrystallite Pt-polyelectrolyte multilayers relative to a polycrystalline bulk Pt surface. This potential shift is attributed to a kinetic limitation in the reductive hydrogen adsorption as a result of the Pt nanoparticle surface modification and the polyelectrolyte environment.     

Isolierung und Nachweis basischer Arzneimittel in der Toxikologie

Zusammenfassung Zu den schwierigsten Aufgaben der toxikologischen Analyse gehört die rasche und sichere Isolierung und Identifizierung organischer Basen aus dem Untersuchungsmaterial. Mit einem entsprechenden Extraktionsverfahren oder durch Fällung mit Tetraphenylborat in einem systematischen Analysengang können sehr günstige Ausbeuten erzielt werden. Die Reinigung der Rohextrakte oder -fällungen erfolgt prinzipiell mittels Dünnschichtchromatographie. Aus den Tetraphenylboratkomplexen werden dabei auf den Kieselgelschichten die reinen Basen in Freiheit gesetzt. An Hand derR _f- Wert-Tabellen ist eine Identifizierung möglich, wobei Substanzen mit gleichemR _f- Wert durch fraktionierte Extraktion bei verschiedenem p_H getrennt werden können. Eine weitere Identifizierung kann mit Hilfe der UV-Spektren erfolgen.

---

Summary Among the most difficult problems of toxicological analysis are the rapid and reliable isolation and identification of organic bases from the material under examination. Very satisfactory yields can be obtained by means of a suitable extraction procedure or through precipitation with tetraphenyl borate in a systematic scheme of analysis. The purification of the crude extracts or precipitates is accomplished fundamentally by thin layer chromotography. The pure bases are liberated on the silica layers from the tetraphenyl borate complexes. An identification is possible through reference toR _f- tables; substances with likeR _f value can be separated by fractional extraction at different p_H values. A further identification can be made with the aid of UV spectra.

---

Résumé L'isolement rapide et sûr des bases organiques dans une substance à l'étude et leur identification représentent l'un des problèmes les plus difficiles de l'analyse toxicologique. On peut atteindre des rendements très satisfaisants avec un procédé d'extraction analogue ou par précipitation par le tétraphénylborure dans un processus d'analyse systématique. La purification de l'extrait brut ou des produits de précipitation s'effectue principalement au moyen de la chromatographie en couche mince. Les bases pures sont libérées des complexes au tétraphénylborure en opérant sur couches en gel de silice. On peut faire une identification en se servant des valeurs desR _f figurant dans les tables, ce qui permet de séparer les substances de mêmeR _f par extraction fractionnée à des p_H différents. Une identification plus poussée peut avoir lieu à l'aide des spectres UV.